Honeywell's new product which replaces the older PX pressure transducers that were either brass body, or large stainless body, with a lower cost, compact stainless sensor body and sensor membrane, available in pressure ranges up to 500 psig and ok to use with fuel. 

Specifications:

• 1/8 NPT Sealing Thread

• 0.5 to 4.5 volt ratiometric output (0 psi at 0.5 volts and 150 psi at 4.5 volts, linear between these points)

• 3-way circular GT150 / MP150 connector

• Requires 5 volt DC supply voltage and analog ground

• Accuracy: ±0.15 %FSS typ.

• Temp Drift: <0.50% Full Scale

• Stability: <0.25% Full Scale/Year

• Operating Temp: -40C to 125C

• Burst Pressure: 1000PSI

• Response Time: 1 ms (10% to 90% step change in pressure)

• Wetted Materials: 304L Port & 316L Stainless Steel diaphragm

• Vibration: 20G’s peak to peak sinusoidal

• Weight: <30g

• Supply Current: 5mA MAX. at 5 Vdc

• Installation torque: Two to three turns from finger tight